logitech-streamcam-webcam-software

Logitech StreamCam: Software, Driver, and Setup Guide


Logitech StreamCam Software and Drivers Downloads for Windows 11, 10, 8, 7, macOS, Linux, and ChromeOS, User Manual, Setup Guide, Specs, Manual Installations, and Review. Here, logitechsoftwarecenter.com provides it for you. Below, we provide a lot of software and setup manuals for your needs. Also available is a brief review of the products you need. We hope you enjoy this page.

So before using the webcam, you must install Logitech Capture, Logi Tune, and Logitech G HUB software. This Logitech StreamCam software is a user-friendly, easy-to-use, and powerful application to enhance the capabilities of your Logitech webcam so that it can be used to its full potential.

The Logitech Capture or Logi Tune software allows you to adjust button customization focus and exposure settings, smart framing, stereo or mono sets, firmware updates, and many more on your Logitech StreamCam. However, before downloading any available software, ensure your device is compatible with that software version.

Logitech StreamCam Software: Descriptions

Installing the Logitech StreamCam software and drivers on your computer is essential. The webcam will function maximally and optimally with the necessary drivers and software. Often, all the required drivers and software are included in the purchase package. Still, you may also need to install a newer version.

Download the Logitech StreamCam – Full HD 1080p Streaming Webcam software and driver, then run it. Install the driver or software, ensure everything runs well, and test on your device. If the StreamCam has issues or has trouble, You can try reinstalling the software or driver.

logitech-streamcam-webcam-software

The growing popularity of live streaming trends continues to encourage peripheral manufacturers to create devices specifically for content creators. Products that fall into this category are designed to simplify the process of content creation in general. One good example is the latest product from Logitech below.

Looking at the name Logitech StreamCam, we can already guess it is a streamer-generation webcam. Technically, this camera can record video at a maximum resolution of 1080p 60 fps, but the potential will only be seen if combined with Logitech Capture software. The combination embodies some intelligent features, one being AI-based face recognition.

Software and Features

StreamCam’s ability to recognize faces directly impacts the focus, exposure, and framing settings. These three parameters will be adjusted automatically by StreamCam so users can focus entirely on the content they create. Besides Logitech Capture, StreamCam is compatible with popular software such as OBS, XSplit, and Streamlabs.

Another powerful feature of Logitech StreamCam is that this camera supports stabilizer features so that the resulting video recording looks smoother. This camera can record vertical videos ideal for platforms such as Instagram and Facebook Stories and record sound with stereo or mono settings.

logitech-capture-for-streamcam

Logitech added several additional features to StreamCam, including Dark Mode, transition effects, filters, and text overlays, which can be used on Mac OS. Logitech StreamCam can be connected to a computer or laptop via USB-C. This camera packs an f/2.0 lens with a viewing angle of 78 °, and a pair of omnidirectional microphones support the audio performance.


Logitech StreamCam Software Compatibility

Logitech StreamCam is a webcam that can record 60fps video at Full HD resolution, sufficient for live broadcast activities on various social media platforms. This webcam relies on a USB Type-C connectivity port to connect to a PC and is compatible with Windows 7 or later, macOS 11 or later, Chrome OS, and Linux.

Logitech provides Logitech Capture, Logi Tune, and Logitech G HUB to use the additional webcam features. However, you can also use this webcam without installing additional software on any operating system; it’s just that you can’t use the extra features and get the most out of the webcam.

logitech-streamcam-specs

Below are details for Logitech StreamCam software compatibility:

  • Windows: Compatible with Windows 8, 10, and 11 (32-bit and 64-bit versions).
  • MacOS: macOS 10.13 and later versions (Includes macOS High Sierra, macOS Mojave, macOS Catalina, and macOS Big Sur).
  • Linux: Logitech provides limited support for Linux systems.
  • Chrome OS: However, the level of functionality and customization may vary compared to Windows and macOS.

It is always recommended to check the device compatibility list on the Logitech Support website for the latest information and to ensure the device you use supports all the features of the Logitech StreamCam – Full HD 1080p Streaming Webcam.

See Also:  Logitech G203 Software, Driver, Settings & Customization

Logitech StreamCam Specification

DIMENSIONS

Without mount:

  • H x W x D: 2.59 in x 2.28 in x 1.89 in
  • Weight: 150 g

With monitor mount:

  • H x W x D: 3.27 in x 2.28 in x 1.89 in
  • Weight: 222 g
  • Cable length: 1.5 m USB – C3.1 cable

TECHNICAL SPECIFICATIONS

  • Max Video Resolution: 1080p/60 fps in MJPEG
  • Supported resolutions: 1920 x 1080, 1280 x 720, 960 x 540, 848 x 480, 640 x 360, 320 x 240

SYSTEM REQUIREMENTS

  • Windows 10 or above
  • Mac OS 10.14 or above
  • 7th Gen Intel Core i5 or later
  • USB 3.1 Gen 1 Type-C direct connection

Logitech StreamCam Software Download

We are committed to providing you with the best experience for your Logitech devices on our website. That’s why we offer a variety of free drivers and software for Windows 11, 10, 8, 7, and Mac OS to ensure your Logitech devices work optimally.

We have the drivers and software you need to get the most out of your Logitech devices: Logitech keyboards, webcams, speakers, touchpads, or other Logitech devices. It allows you to customize Logitech devices to your liking.

One of the advantages of downloading drivers and software from our website is that they are free, safe, and without harmful viruses or malware. So you don’t have to worry about costs – all our drivers and software are free to download.

logitech-streamcam-driver

Logitech StreamCam has complete features to make live broadcasts easier. Supported by Logitech Capture, Logi Tune, and Logitech G HUB software, you can enjoy various innovative features StreamCam offers, such as focus and exposure settings, Smart Framing, stereo or mono sets, and many more.

You must download and install Logitech Capture, Logi Tune, and Logitech G HUB Software to use the full features of this webcam. Below are the latest versions of software and drivers for the Logitech StreamCam for Windows and Mac OS:

Logitech Capture Software

logitech-capture-software

Software for Windows

  • Software Version: 2.08.11
  • Last Update: 2023
  • OS: Windows 10
  • File Size: 114 MB

Download Here

Software for Mac OS

  • Software Version: 2.08.12
  • Last Update: 2023
  • OS: macOS 10.14, macOS 10.15, macOS 11
  • File Size: 139 MB

Download Here


Logi Tune Software

logi-tune-software

Software for Windows

  • Software Version: 3.3.32
  • Last Update: 2023
  • OS: Windows 10, Windows 11
  • File Size: 125 MB

Download Here

Software for Mac OS

  • Software Version: 3.3.32
  • Last Update: 2023
  • OS: macOS 11, macOS 10.15, macOS 12.0, macOS 13
  • File Size: 134 MB

Download Here


Logitech G HUB Software

logitech-g-hub-software-download

Software for Windows

  • Software Version: 2023.7.448769
  • Last Update: 2023
  • OS: Windows 11, Windows 10
  • File Size: 40.6 MB

Download Here

Software for Mac OS

  • Software Version: 2023.7.448769
  • Last Update: 2023
  • OS: macOS 13, macOS 12.0, macOS 11
  • File Size: 16.4 MB

Download Here


It is the latest version of the Logitech Software directly from Logitech Official Support. Please contact us if you have problems with this link. You can contact us at this email: admin@logitechsoftwarecenter.com. Logitech Software and Drivers for your computer or laptop can be downloaded from a trusted link at this website. We provide the latest version for you.


Download Logitech StreamCam software and drivers. The software installation will start in a few steps. In the first stage, you need to connect your webcam to the PC and select the language you are using. Furthermore, select the type of configuration (select default settings). The installation process starts. Finishes the installation, then tests the webcam to work.

You can download the Logitech Capture, Logi Tune, and Logitech G HUB Software free from our website for the Logitech StreamCam – Full HD 1080p Streaming Webcam. Here are the simple and easy steps to download and Installing the software on Windows and Mac OS:

Installing Software on Windows 7, 8, 10, and 11

Download and Installation Procedure:

  1. Click the link (Download Here), select (Save), specify “Save As,” then click (Save) to download the file.
  2. The downloaded file will be saved in the specified place in (Zip, Rar, or .exe) format.
  3. If the file is in Zip or Rar, you must extract it before installing it.
  4. Suppose the file is in exe format. Then, double-click the downloaded file to decompress it, and the installation will start automatically.
  5. The software application is now ready to use.

Installing Software on Mac OS

Download and Installation Procedure:

  1. Download the file (Download Here). Specify the file storage location, and check your computer settings.
  2. After that, double-click the downloaded file and install it in the Disk Image.
  3. Then, double-click the mounted Disk Image.
  4. Double-click the packaged file in the folder. The installation starts automatically.
  5. The software application is now ready to use.

After the software installation, your Logitech StreamCam – Full HD 1080p Streaming Webcam can be used. If you have problems with your webcam, try uninstalling and reinstalling the software, or contact Logitech support for further assistance.


How to Update Logitech StreamCam Software?

Logitech StreamCam – Full HD 1080p Streaming Webcam has high features, performance, and technology to support your daily activity. Software and driver updates are regularly required to take full advantage of the features and performance of this webcam.

See Also:  How to Connect/Pair Logitech Keyboard [A Complete Guide]

Below is how to update the webcam to the latest version. Updating the software is easy, and you can follow these steps to update the software and driver for the Logitech StreamCam on your PC (Windows or Mac OS):

  • Run the software on your computer.
  • You will see a notification in the window’s lower-right corner if a software update is available.
  • Click the “Update” button to start the software update process.
  • The software will start downloading the updated file.
  • After the download is complete, the update will be installed automatically.
  • When the update is complete, restart your computer.

Note: Do not unplug your Logitech StreamCam – Full HD 1080p Streaming Webcam during the update process.

The latest Logitech Capture, Logi Tune, and Logitech G HUB Software versions are installed on your computer. We recommend continuously checking for updates to ensure you have the newest version of the software installed.


How to Uninstalling the Logitech StreamCam Software?

When you have problems with the Logitech Capture, Logi Tune, and Logitech G HUB Software and need to change its version. To uninstall the Logitech StreamCam – Full HD 1080p Streaming Webcam software and driver, you need to open the device manager on your computer and follow these steps:

  1. Disconnect the Logitech StreamCam from your PC.
  2. Open Control Panel in Windows.
  3. Uninstall the Logitech Software.
  4. Follow the software Uninstall process.
  5. Restart your computer.
  6. Verify the Uninstallation of software.

Note: If you are having trouble uninstalling the software using the steps above, try using a third-party uninstall tool or contact Logitech support for further assistance.

You can uninstall the Logitech StreamCam – Full HD 1080p Streaming Webcam software from your computer by following the steps above. Uninstalling software is necessary if you have problems with the software or no longer need it.


How To Set Up the Logitech StreamCam Webcam?

We’ve provided all the user manuals and setup guides you need to get started with your Logitech StreamCam – Full HD 1080p Streaming Webcam right here. If you still have questions, browse the FAQs at the bottom.

manual-setup-logitech

Logitech StreamCam – Setup Guide:

Click Here



Access your StreamCam Settings

logitech-streamcam-setting-up

  • Camera Adjustment is located in the product view. You must manually select New Camera Mode to control Zoom, Focus, and Exposure.
  • Priority can be set to Frame Rate or Exposure in the same panel.
  • You can use existing filters or customize your own.
  • Use Settings to change the controls on Logitech Capture, Logi Tune, or Logitech G HUB Software, and install firmware updates when available.

Customize the StreamCam with Logitech Capture

StreamCam is a popular webcam designed for content creators and streamers. Logitech Capture software supports this webcam, which offers several features to enhance your streaming and recording experience.

logitech-streamcam-driver-windows-10

Logitech Capture allows more customization on supported Logitech webcams. Get the best from Logitech Capture with a fresh, easy-to-use interface and the latest features to be more productive and innovative.

To customize Logitech StreamCam using Logitech Capture software, you can follow these steps:

1. Install Logitech Capture on your PC:

Download and then install the Logitech Capture software on your computer.

Note: Ensure the software is the latest version and compatible with your computer.

2. Connect your webcam to the PC:

Connect your Logitech StreamCam – Full HD 1080p Streaming Webcam and ensure the webcam is securely connected to the computer.

3. Go to Options in Logitech Capture Software:

Open the Logitech Capture software on your computer and access the options menu to configure the streamcam.

4. Customization Options:

The advantage of Logitech Capture software is its easy-to-use interface, allowing you to adjust various settings for your Logitech StreamCam – Full HD 1080p Streaming Webcam. Here we provide some settings for your webcam:

  • Advanced Settings
  • Customizable Video Settings
  • Video Effects
  • Vertical Video Capture
  • Multiple Camera Support
  • Smart Auto-Focus
  • Scene Integration
  • Custom Overlays
  • Audio Control
  • Live Text and Image Overlays
  • Recording and Streaming Integration

5. Create a Profile:

If desired, you can create several profiles with different settings for different applications or tasks. For example, a general profile and a graphic design profile.

6. Apply Changes and Save Profile:

Most importantly, do not forget to apply and save your changes.

7. Check Software update:

Check for Logitech Capture software updates regularly to ensure you have the latest features and bug fixes.

Software features may change over time with version updates that Logitech releases. For the most accurate information, we recommend visiting the Logitech official website for more details about your Logitech StreamCam – Full HD 1080p Streaming Webcam.


Frequently Asked Questions (FAQs)


Do I need to install software for Logitech StreamCam?

Suppose you want to maximize the performance of your Logitech StreamCam. In that case, you must install Logitech Capture, Logi Tune, and Logitech G HUB software. Connect this webcam to your computer and open the software. You can adjust focus and exposure settings, smart framing, stereo or mono sets, and more.


How to update Logitech StreamCam Software?

To update your Logitech StreamCam software or driver, you can download the latest software or driver from our website; after you download the software or driver, double-click to install it on your computer.


How to remove Logitech StreamCam Software?

There are several ways to uninstall Logitech StreamCam software or driver. The first way is to enter the control panel on your PC or laptop, then select uninstall a program. There, you can select Logitech and then uninstall the software.


Where to download Logitech StreamCam Software?

Logitech StreamCam software or driver can be found on this website. There are several ways to find the software or driver you need. You can use the search bar to make it easier.


Why is it important to install a driver for StreamCam?

Installing Logitech StreamCam software correctly provides access to additional features, ensures optimal compatibility, and improves webcam performance. Correct driver or software installation guarantees the webcam can communicate with your device operating system (OS) without issues or trouble, resulting in increased performance.


George Garcia

Thank you for taking the time to read our posts! At Logitechsoftwarecenter we love sharing new articles about Logitech software, Driver, Setup, and Logitech product troubleshooting every week. So you'll always be up-to-date on the products and topics you're interested in.